The padding inside BabyLove nappies is made from a mixture of wood pulp and a Super Absorbent Polymer called Polyacrylate. The Super Absorbent starts in a crystal form and turns into a gel when wet. This, combined with the wood pulp helps to prevent nappy leakage. In a machine wash the nappy would have absorbed an enormous amount of water. This, combined with the washing action, would have resulted in the nappy disintegrating into small pieces, most likely clumps.

You will need to clean both the washing machine and any clothes that were in the wash with the nappy. Firstly remove all clothes from the washing machine. Scoop out any left over nappy/pant, wood pulp and absorbency crystals that may be left in the machine. Remove and clean the machine filter, then replace. Once the filter has been replaced, run a normal wash cycle with no clothes in the machine. If you like, add some anti- bacterial liquid to the cycle to eliminate any germs present.

Once the machine is clean, re-wash any clothes that have nappy particles on them. If any item of clothing is severely affected, wash it separately by hand and then re-wash it in the machine. Once again add some anti-bacterial rinse to the wash if you desire. Clean the washing machine filter again once the cycle is complete. If there are any remaining particles on your clothes remove them with a lint brush once the clothes are dry.

BabyLove nappies and nappy pants are available in a range of sizes to suit every stage of development. Every BabyLove nappy and nappy pants pack features a weight range table to help parents select the most appropriate nappy for their baby. Every child is an individual, so the shape, fit and size may vary between packs. The weight range is a guide only to help Mums and Dads to determine the best size nappy for their child. The table below outlines the weight guide and slight overlaps between each of the sizes to help guide parents to find the best nappies for their child.

SIZE NAPPY TYPE WEIGHT RANGE
Newborn Nappies Up to 5kg
Infant Nappies 3 to 8 kg
Crawler Nappies 6 to 11 kg
Toddler Nappies & Nappy Pants 9 to 14 kg
Walker Nappies & Nappy Pants 12 to 17 kg
Junior Nappies & Nappy Pants 15 to 25 kg

BabyLove nappies are designed for day and night time use and have a set of specifications, which are strictly followed by our Quality Team. Every child is different in shape and size, so, occasionally leakage problems may occur. Other factors, such as how often the child has a bladder or bowel movement may also affect the absorbency of the nappy. The weight range on the pack is a guide only to help mums and dads determine the best size nappy for their child. Leakage issues can often be resolved by moving to the next size up.

BabyLove nappies are made up of various components:

The padding inside BabyLove nappies is made of a mixture of wood pulp and a Super Absorbent Polymer called Polyacrylate. The Super Absorbent Polymers start in a crystal form and turns to a gel when wet. This, combined with the wood pulp, helps prevent nappy leakage. Sometimes, however, the safe gel crystals can be found on your baby’s skin during use, don’t worry, it will not harm your child in any way. Simply remove the crystals with a damp cloth or nappy wipe.
The outer cover of the nappies use a non woven material and a polythene back
Velcro grip tabs
Acquisition Layer to help distribute fluid evenly through the nappy
An adhesive to hold the nappy together
Lycra elastic
Leakage control guards that work as a barrier to help prevent leakage.

If you notice gel crystals on your baby’s skin simply wipe away with a damp washcloth or nappy wipe.

BabyLove nappies contain a Super Absorbent Polymer called Polyacrylate and is mixed in with the nappy padding. This material turns liquid into gel, helping prevent nappy leakage. The Super Absorbent Polymers start in a granulae/ crystal form and turns to gel once wet. Occasionally this safe, gel material will seep out of the pad and onto your baby’s skin. The gel material is quite safe and will not harm your baby in any way.